visit Air Craft website

Air Craft
DataSheet

Powerful OutRunner motors require an very rigid mount.  The HP-Z30-FRTMNT is made of rigid cast aluminum to provide the required stiffness. It weighs only 45 grams, and comes with full mounting hardware.  Diameter at the base is 65mm, and diameter at the nose is 44mm.  See the photo below for other dimensions.

Although we certainly hope you'll choose a Hyperion Z30 motor to go with the mount, mounting hole placement is designed to allow use with virtually any outrunner motor in the same size class, such as AXI 28 series, Hacker A30 series, and other brands with 25mm spacing.

NOTE:  Please do be sure that you choose motor mounting screws of appropriate length. The mounting screws should not protrude inside the motor. If the screws are too long, they will damage the motor coils.