visit Air Craft website

Air Craft
DataSheet

HYPERION
Z-3019

Specifications


Hyperion Z30 Series Outrunner General Information Here

  HP-Z3019-10 HP-Z3019-12
Stator Diam. mm 30 30
Stator Length mm 19 19
Weight g 142 142
Outside Diameter mm 37 37
Length mm 43.8 43.8
Output Shaft Diameter mm 5 5
Mount Screw Diameter mm 3 3
Max eff. Current A 28-37 24-33
Peak current A 46A 60sec 42A 60sec
LiPo cells 2~4 2~4
NiMH & NiCd cells 6~12 6~12
Winding 10T 12T
Resistance Ohm 0.019 0.026
Io A 2.8 2.3
KV rpm/V 1070 900
Recommended ESC HP-TITAN-50P
HP-TITAN-80P
HP-TITAN-50P
HP-TITAN-80P

A DC Power supply was used for testing.  You can approximate the voltage a battery pack will produce using this chart for cell counts.  The chart assumes that the battery is being used near rated current limit.  Using a pack with higher capacity cells may result in higher voltage, rpm,  and current draw. Appearance in the data does not mean the prop and voltage combination is necessarily recommended;  see rated max efficient and maximum current specs above.
Lipo/1Cell :3.35V  
Nicd/1Cell :1.1V  
Lipo 2S 6.7V 6N
  7.7V 7N
  8.8V 8N
  9.9V 9N
Lipo 3S 10.1V  
  11V 10N
  12.1V 11N
13.2V 12N
 Lipo 4S 13.4V  
  14.3V 13N
  15.4V 14N
HP-Z3019-10 Prop Data
Prop Volts Amps RPM Watts
APC8X6 E 12.1 26.2 10980 317
  13.2 30.7 11760 405
  13.4 31.7 11940 425
  14.3 35.4 12630 506
  15.4 40.5 13260 624
 APC9x6 E 10.1 20.4 9180 206
  11.0 23.8 9960 262
  12.1 28.1 10800 340
  13.2 32.8 11610 433
  13.4 33.7 11820 452
  14.3 37.9 12480 542
 APC10x5 E 8.8 18.5 8040 163
  9.9 22.4 8940 222
  10.1 23.3 9090 235
  11.0 27.2 9750 299
  12.1 32.3 10590 391
  13.2 37.9 11310 500
  13.4 38.7 11460 519
 APC11x5.5 E 8.8 23.8 7710 209
  9.9 29.1 8655 288
  10.1 29.9 8670 302
  11.0 35.5 9330 391
APC12x6 E 6.7 19.7 5722 132
  7.7 24.4 6570 188
  8.8 31.4 7335 276
  9.9 38.2 8055 378
  10.1 39.5 8205 399
APC13x6.5 E 6.7 25.3 5595 170
  7.7 32.2 6330 248
  8.8 39.5 6900 348
APC14x7 E 6.7 30.8 5325 206
  7.7 39.2 5880 302

 

HP-Z3019-12 Prop Data
Prop Volts Amps RPM Watts
10x5 E 10.1 14.9 7920 150
  13.4 25.1 10140 336
11x5.5 E 10.1 19.8